VFD 300N H2 Series Single Phase 220V Inverter (0.75-3.0 kW)

VFD 300 H2 Series – Single Phase 220V Input / Single Phase 220V Output

The VFD 300 H2 Series is a high-performance vector inverter designed for single-phase 220V input and single-phase 220V output applications. Ideal for small motor speed control with advanced SVPWM control technology.

Key Features

• Output Frequency: 0-600 Hz
• Overload Capacity: 150% rated current for 1 minute, 180% for 3 seconds
• Control Method: Optimized SVPWM control
• Control Mode: Sensorless vector control with optimal low-frequency dead zone compensation
• Frequency Resolution: Digital 0.01Hz; Analog max frequency ×0.025%
• Built-in PID closed-loop control
• Multi-speed operation via built-in PLC or control terminals
• RS485 communication support
• 5 programmable digital inputs
• 2 analog inputs (0-20mA, 0-10V)
• 2 relay outputs
• Comprehensive protection: overcurrent, overvoltage, undervoltage, overheat, overload

Model Specifications

Electrical Specifications

Applications: CNC machines, small conveyors, packaging equipment, textile machinery, and other single-phase motor control applications.

H2 Series Overview — Single Phase In, Single Phase Out

The H2 series takes a single-phase 200–240V supply and delivers a variable single-phase output from 0 to 240V, so the speed of a single-phase motor can be adjusted instead of running at a fixed speed. Because input and output are both single phase, no phase conversion is involved: this is the series to choose when the load itself runs on a single-phase supply. Four models cover 0.75 kW to 3.0 kW. The 200–240V input window covers both 220V and 240V single-phase supplies, and output frequency is adjustable up to 600 Hz. Models in this series use the plastic enclosure and are available in four enclosure designs (S / Y / D / Z).

OEM & ODM available. Contact us for pricing and technical support.

Full model list: See all 118 certified 300N models by input/output voltage configuration →

Control Circuit Wiring Diagrams

The following diagrams show the control circuit terminal layout and wiring for each main board type used in the 300 Series. The board type varies by model and power rating.

Main Circuit Terminal Layout

Main Circuit Terminal Layout (R/L1, S/L2, T — PP, PB — U, V, W — G, E)
Tap to open full-size diagram

Control Board Wiring Diagrams

A-Type Main Board Wiring Diagram
Tap to open full-size diagram

Wiring Notes:

• Analog voltage signals require shielded cables; wiring distance should not exceed 20m.
• In severe interference environments, equip analog signal source side with filter capacitor or ferrite core.
• Terminal assignments may vary by model — refer to actual product labeling.